Ruckus ICX交换机

RUCKUS ICX 7850

RUCKUS ICX 7850下一代 100G 企业的核心启动固定外形革命的下一阶段:卓越的可扩展性:高达 76.8 Tbps 的组合交换容量,每 12 个单元 384 个 100GbE 或 576 个 10/25 GbE 端口,支持最苛刻的企业环境。最大灵活性:网络核心连接和交换容量可以分布在任何需要的地方。不需要像传统机箱一样位于同一个配线间。高级安全性: 256 bit MACsec 提供最

  • 型号: Ruckus ICX 7850-32Q,Ruckus ICX 7850-48FS
图片关键词

RUCKUS ICX 7850

下一代 100G 企业的核心

启动固定外形革命的下一阶段:

  • 卓越的可扩展性:高达 76.8 Tbps 的组合交换容量,每 12 个单元 384 个 100GbE 或 576 个 10/25 GbE 端口,支持最苛刻的企业环境。

  • 最大灵活性:网络核心连接和交换容量可以分布在任何需要的地方。不需要像传统机箱一样位于同一个配线间。

  • 高级安全性: 256 bit MACsec 提供最大的数据隐私

  • 按需付费:网络核心固定外形交换机的经济高效部署模型

规格概述

  • 交换能力(最大)

    6.4 Tbps

  • 可用端口数量
    • 每单元高达 32 个 40/100 GbE QSFP28 端口

    • 每单元高达 128 个带分流电缆的 10/25 GbE SPF28 端口

    • 每单元高达 48 个 1/10 GbE SFP+ 端口

  • 每个堆栈的交换机数(最大)

    12

  • 聚合堆栈带宽

    9.6 Tbps

  • 冗余电源选件

  • sFlow

  • OpenFlow (SDN)

    是*

  • Campus Fabric 技术

    是*

  • L3 能力

    基本 L3、RIP、OSFP、BGP、VRF

  • 热插拔 PSU 和风扇

  • 前到后或后到前气流

  • MCT

  • VXLAN

    是*

  • ***适用于更高软件版本

     



特点

  • 卓越的可扩展性

  • 业内领先的 40/100 Gbps 以太网端口密度和灵活性

  • 每台设备最多 32x100 或 128x25 个 GbE 端口

  • 最大  9.6  Tbps 的聚合堆栈带宽

  • 堆叠多达 12 台设备,堆叠交换机之间的距离可达 10km 

  • 持续弹性

  • 每个交换机 8 个全双工 100 Gbps 堆栈端口

  • 使用运行中软件升级 (ISSU),无需停机即可对软件进行升级

  • 无需干预的快速故障切换

  • 冗余电源支持热插拔,且具有负载分配功能

  • 需求增加成本较低

  • 灵活的分布式机架堆栈架构

  • 可从小型部署开始,随着需求的增加通过堆栈增加容量

  • 小巧的 1U 机箱设计,节省空间和配线柜的耗电量

  • 统一的有线和无线管理

  • 与 Ruckus Wi-Fi 接入点无缝对接

  • 对 Ruckus SmartZone 的支持可提供统一的有线和无线网络管理和网络自动化


Ruckus ICX 7850

All Ruckus ICX 7850 models offer, dual power supply slots, 5 or 6 fan tray slots in the back, one RJ-45 Ethernet port for out-of-band network management, one USB Type-C port for console management, one RJ-45 port for serial console management, and one USB Type A port for external file storage.

R·uckus ICX 7850-32Q

32x 40/100 GbE QSFP28 ports supporting native 40 GbE or 100 GbE, or breakout* to

4x10 GbE or 4x25 GbE

·   Up to 8 of the rightmost QSFP28 ports as stacking ports

2x hot-swappable load sharing power supplies and 6x hot- swappable fan assemblies with reversible

airflow options (Power supplies and FAN airflows must be the same)

R·uckus ICX 7850-48FS

48x 1/10 GbE SFP+ ports with 128/256 bit MACsec and LRM support

·   8x 40/100 Gbps QSFP28 ports supporting native 40 GbE or 100 GbE, or breakout* to 4x10 GbE or 4x25 GbE

·   Up to 8 of the QSFP28 ports as stacking ports

2x hot-swappable load sharing power supplies and 5x hot- swappable fan assemblies with reversible

airflow options (Power supplies and FAN airflows must be the same)

R·uckus ICX 7850-48F

48x 1/10/25 GbE SFP28 ports

·   8x 40/100 GbE QSFP28 ports supporting native 40 GbE or 100 GbE, or breakout* to 4x10 GbE or 4x25 GbE

·   Up to 8 of the QSFP28 ports as stacking ports

2x hot-swappable load sharing power supplies and 5x hot- swappable fan assemblies with reversible

airflow options (Power supplies and FAN airflows must be the same)

R·uckus ICX 7850-32Q Rear View

2 power supply slots for RPS19-E or RPS19-I power supplies

·   6 fan tray slots for ICX-FAN-12-E or ICX-FAN12-I fans

R·uckus ICX 7850-48F and -48FS Rear View

2 power supply slots for RPS19-E or RPS19-I power supplies

·   5 fan tray slots for ICX-FAN12-E or ICX-FAN12-I

 

*  Breakout not supported with stacking.


图片关键词

Enterprise-Class Features Across Ruckus ICX Switches

The Ruckus ICX switch family delivers the enterprise class features for flexibility, scalability and simplified management.

·   Ruckus Campus Fabric technology delivers unmatched flexibility, scalability and simplified management for campus network deployments. Incorporating all of the ICX 7000 switch families with up to 1800 ports in a single logical domain, Campus Fabric

allows customers the benefits of a traditional chassis, with the flexibility of stackable switches at a dramatically reduced Total Cost of Ownership (TCO).

·   Advanced stacking goes beyond traditional stacking with capabilities that take flexibility, ease of management and cost effectiveness to then next level, including:

  Stacking on standard Ethernet ports

  Long-distance stacking

  No hardware module required for stacking

  In Service Software Upgrade (ISSU) to minimize downtime

  Superior scalability with the industry-leading number of switches per stack

  Stacking at the access, aggregation and core layers

·   Enterprise-Class Availability to improve resiliency and minimize downtime, including:

  Hitless stack failover

  Hot-insertion/removal of stack members

  Redundant power supplies

  In Service Software Upgrades for switch stacks

·   Unified wired and wireless network management with Ruckus SmartZone network controller:

  Ruckus SmartZone centralizes management of the entire family of Ruckus switches and wireless Access Points with a single easy to deploy management platform

  Discovers, monitor, and deploys configurations to groups of switches and wireless APs

·   On-boarding and security policies across ICX switches and wireless networks.

·   OpenFlow 1.3 protocol support in hybrid mode allows user to deploy traditional Layer 2/3 forwarding with OpenFlow on the same port for Software Defined Network (SDN) enabled programmatic control of the network

·   Open Standards based management, monitoring and authentication

  sFlow-based network monitoring to help analyze traffic statistics and trends on every link and overcome unexpected network congestion

  Open-standards management includes Command Line Interface (CLI), Secure Shell (SSHv2), Secure Copy (SCP), and SNMPv3

  Support for Access Controller Access Control System (TACACS/TACACS+) and RADIUS authentication helps ensure secure operator access

  LLDP and LLDP-MED protocol support for configuring, discovering, and managing network infrastructure such as QoS, security policies, VLAN assignments, PoE power levels, and service priorities


图片关键词Ruckus ICX 7850 Switch Feature/Model Comparison

 


40/100 GbE Switch

1/10 GbE Switch

1/10/25 GbE Switch


Ruckus ICX 7850-32Q

Ruckus ICX 7850-48FS

Ruckus ICX 7850-48F


Feature

SPECIFICATIONS

Switching capacity

(data rate, full duplex, stacking enabled)

 

6.4 Tbps

 

2.56 Tbps

 

4.0 Tbps

Forwarding capacity

(data rate, full duplex, stacking enabled)

 

2.0 Bpps

 

1.9 Bpps

 

2.0 Bpps

1/10 Gbps SFP+ downlinks


48


1/10/25 Gbps SFP28 downlinks



48

40/100 Gbps QSFP28 ports

32

8

8

Max ports usable for stacking

8

8

8

Base IPv4/v6 Layer 3 routing (static routing, RIP)

 

Standard

Advanced IPv4/v6 Layer 3 routing (OSPF, BGP, VRRP, PIM, PBR, VRF)

 

With license

MACsec 128/256bit

N/A

With license

N/A

Aggregated stacking bandwidth

9.6 Tbps

Stacking density

(maximum switches in a stack)

 

12

Maximum stacking distance (distance between stacked switches)

 

10 km

 

Feature

POWER

Power inlet

C14

Input voltage/frequency

AC: 100 to 240 VAC @ 50 to 60 Hz, -48V to -60V DC

Power supply rated maximum

2 x 650W

 

Airflow

Front-to-back, or back-to-front

(depending on power supplies and fans installed)

Switch power utilization1 (25°C) Typical

Maximum

 

336.5 W

479.6 W

 

336.5 W

443.1 W

 

282.4 W

396.2 W

Switch heat dissipation1 (25°C) Typical

Maximum

 

1149 BTU/hour

1637 BTU/hour

 

1149 BTU/hour

1512 BTU/hour

 

963.7 BTU/hour 1352 BTU/hour

 

Feature

ENVIRONMENT

Weight1

9.1kg (20lb)

9.1kg (20lb)

8.8kg (19.4lb)

Dimensions

43.7mm (1.72in) H

440mm (17.32in) W

444.5mm (17.5 in) D

43.7mm (1.72in) H

440mm (17.32in) W

444.5mm (17.5 in) D

43.7mm (1.72in) H

440mm (17.32in) W

444.5mm (17.5 in) D

Acoustics1 (25°C, ISO 7779)

50.6 dBA

50.3 dBA

50.3 dBA

MTBF1 (25°C)

467,508

298,215

457,244

 

 

 

1 Switch includes two AC power supplies, 5 fans for 48F and 48FS, 6 fans for 32Q


Ruckus ICX 7850 Specifications

 

Feature

CAPABILITIES

·

Connector options

1/10 Gbps SFP+ ports

·   1/10/25 Gbps SFP28 ports 40/100 Gbps QSFP28 ports

·   Out-of-band Ethernet management: 10/100/1000 Mbps RJ-45 Console management: USB type C (Type C plug) and RJ45

·   File Transfer: USB port, standard-A plug

For the latest information about supported optics, .

DRAM

·   4 GB

·

NVRAM (flash)

32 GB

·

Packet Buffer Size

32 MB

·

Maximum VLANs

4095

·

Maximum PVLANs

256

·

Maximum STP (spanning trees)

254

·

Maximum VEs

512


FEATURES

Profile 1 (Default)

·

Profile 2

·

Maximum MAC Addresses

32K

·

96K

·

Maximum routes (in hardware)

128K (IPv4)

·   7K (IPv6)

20K (Next Hop Addresses)

·

16K (IPv4)

·   1K (IPv6)

20K (Next Hop Addresses)

Trunking

Maximum ports per trunk: 16

·   Maximum trunk groups: 256

·

Maximum jumbo frame size

9,216 bytes

·

Average latency

0.8 µs

·

QoS priority queues

10 for Unicast and Multicast traffic

·

Multicast Groups

8,192 (Layer 2)

·   8,192 (Layer 3)

·

VRF

128 instances


Feature

CAPABILITIES

·                                                   ·

Layer 2 switching

802.1s Multiple Spanning Tree

·   802.1x Authentication Auto MDI/MDIX

·   BPDU Guard, Root Guard Dual-Mode VLANs

·   Dynamic Voice VLAN Assignment Dynamic VLAN Assignment

·   Fast Port Span

GVRP: GARP VLAN Registration Protocol

·   IGMP Snooping (v1/v2/v3) IGMP Proxy for Static Groups

·   IGMP v2/v3 Fast Leave

Inter-Packet Gap (IPG) adjustment

·   Link Fault Signaling (LFS) MAC Address Filtering

·   MAC Learning Disable MLD Snooping (v1/v2) Multi-device Authentication

·

Per-VLAN Spanning Tree (PVST/PVST+/PVRST)

·   Mirroring - Port-based, ACL-based, MAC Filter-based, and VLAN-based

·   PIM-SM v2 Snooping Port Loop Detection

·   Private VLAN

Remote Fault Notification (RFN)

·   Single-instance Spanning Tree Trunk Groups (static, LACP)

·   Uni-Directional Link Detection (UDLD) Metro-Ring Protocol (MRP) (v1, v2)

·   Virtual Switch Redundancy Protocol (VSRP) Topology Groups

·   Q-in-Q and selective Q-in-Q VLAN Mapping

·   MCT (Ruckus Multi-Chassis Trunking)

·

Base Layer 3 IP routing

IPv4 and IPv6 static routes

·   RIP v1/v2, RIPng ECMP

·   Port-based Access Control Lists Layer 3/Layer 4 ACLs

Host routes

·   Virtual Interfaces Routed Interfaces

·   Route-only Support

Routing Between Directly Connected Subnets


Ruckus ICX 7850 Specifications (continued)

 

Premium Layer 3 IP routing (with software license)

·   IPv4 and IPv6 dynamic routes OSPF v2, OSPF v3 (IPv6)

·   PIM-SM, PIM-SSM, PIM-DM, PIM passive (IPv4/IPv6

multicast routing functionality)

·   PBR

Virtual Route Redundancy Protocol VRRP v3 (IPv6)

·   VRRP-E (IPv4, IPv6) BGP4, BGP4+ (IPv6) GRE

IPv6 over IPv4 tunnels

·   VRF-lite (IPv4 and IPv6) MSDP

 

·

Quality of Service (QoS)

ACL Mapping and Marking of ToS/DSCP (CoS)

·   ACL Mapping and Marking of 802.1p ACL Mapping to Priority Queue

·   Classifying and Limiting Flows Based on TCP Flags DiffServ Support

·   Honoring DSCP and 802.1p (CoS)MAC Address Mapping to

Priority Queue

·

Priority Queue Management using Weighted Round Robin (WRR), Strict Priority (SP), and a combination of WRR and SP

 

 

 

 

·

Traffic management

ACL-based inbound rate limiting and traffic policies

·   Broadcast, multicast, and unknown unicast rate limiting

Inbound rate limiting per port

·   Outbound rate limiting per port and per queue

·

Security

MACsec (with license)

·   802.1X authentication MAC authentication

·   Flexible authentication Web authentication

·   DHCP snooping Dynamic ARP inspection

·   Neighbor Discovery (ND) Inspection

Tri-level Access Mode (EXEC, Privileged EXEC and Global

Configuration)

·   EAP pass-through support

IEEE 802.1X username export in sFlow

·

Protection against Denial of Service (DoS) attacks Authentication, Authorization, and Accounting (AAA)

·   MAC Address Locking MAC Port Security Advanced Encryption Standard (AES) with SSHv2

·   RADIUS/TACACS/TACACS+ Secure Copy (SCP)

·   Secure Shell  (SSHv2) Local Username/Password

·   Change of Authorization (CoA) RFC 5176 Trusted Platform Module

·   Protected ports

·

IEEE standards compliance

802.1AB LLDP

·   802.1D MAC Bridging

802.1p Mapping to Priority Queue

·   802.1s Multiple Spanning Tree (MST)

802.1w Rapid Reconfiguration of Spanning Tree

·   802.1x Port-based Network Access Control  (PNAC)

802.3 Carrier Sense Multiple Access/Collision Detection

(CSMA/CD)

·   802.3x Full duplex and Flow Control

·

802.3z 1000Base-SX/LX

·   802.3 MAU MIB (RFC 2239)

802.3ba 40 and 100 Gbps Ethernet

·   802.1AE-MACsec (with license) 802.1Q VLAN Tagging

·   802.1BR Bridge Port Extension 802.3ab 1000BASE-T

802.1 AX-2008 Link Aggregation

·   802.3ae 10 Gigabit Ethernet

IETF RFC standards compliance

For a complete list of RFCs supported by the Ruckus FastIron® software platform, please consult the “FastIron Features and Standards Support Matrix” document available from

·                                 

High availability

Redundant hot-swappable power supplies

·   Hot-swappable fan trays

Layer 3 VRRP/VRRP-E protocol redundancy

·   Real-time state synchronization across the stack

Hitless failover and switchover from master to standby stack

controller

·

Hot insertion and removal of stacked units

·   Layer 2 VSRP switch redundancy In Service Software Update (ISSU)

·   Multi Chassis Trunking (MCT)

·

Management

DHCP Auto Configuration

·   Configuration Logging Digital Optical Monitoring

·   Display Log Messages on Multiple Terminals Embedded Web Management (HTTP/HTTPS)

·   Embedded DHCP Server

Industry-standard Command Line Interface (CLI)

·   SmartZone Network Controller (sold separately) Easy activation of optional software features

·   USB file management and storage Boot from USB storage

·   Macro for batch execution

Out-of-band Ethernet Management

·   ERSPAN support for remote traffic monitoring RSPAN

·   TFTP

TELNET Client and Server

·   Bootp

SNMPv1/v2c

·   DHCP Server and DHCP Relay SNMPv3 Intro to Framework

·   Architecture for Describing SNMP Framework SNMP Message Processing and Dispatching

·   SNMPv3 Applications

SNMPv3 User-based Security Model

·   SNMP View-based Access Control Model SNMP sFlow

·   Network Time Protocol (NTP) Multiple Syslog Servers

·   SCP

EOAM (EFM-OAM)

·   Virtual Cable Tester (VCT)

For Management MIB, please consult the “FastIron MIB

Reference” document available from


Ruckus ICX 7850 Specifications (continued)

 

Feature

ENVIRONMENT

Temperature

Operating temperature: 0°C to 45°C/32°F to 113°F at sea level

·   Storage temperature: −40°C to 70°C/−40°F to 158°F

Humidity

Operating relative humidity: 10% to 90% at 50°C, non-condensing

·   Non-operating relative humidity: 10% to 90% at 70°C, non-condensing

Altitude

Operating altitude: 10,000 ft. (3,000 m) maximum

·   Storage altitude: 39,000 ft. (12,000 m) maximum


Feature

COMPLIANCE/CERTIFICATION

Electromagnetic emissions

FCC Class A (Part 15); EN 55022/CISPR-22 Class A; VCCI Class A; ICES-003 Electromagnetic Emission; AS/NZS 55022; EN 61000-3-2 Power Line Harmonics; EN 61000-3-3 Voltage Fluctuation and Flicker EN 61000-6-3 Emission Standard

Safety

CAN/CSA-C22.2 NO. 60950-1-07; UL 60950-1; IEC60950-1; EN 60950-1:2006 Safety of Information Technology Equipment; EN 60825-1 Safety of Laser Products

Immunity

EN 61000-6-1 Generic Immunity and Susceptibility; EN 55024 Immunity Characteristics; EN 61000-4-3 Radiated, Radio Frequency, Electromagnetic Field; EN 61000-4-4 Electrical Fast Transient; EN 61000-4-5 Surge; EN 61000- 4-6 Conducted Disturbances Induced by Radio-Frequency Fields; EN 61000-4-8 Power Frequency Magnetic Field; EN 61000-4-11 Voltage Dips and Sags

Environmental regulatory compliance

RoHS-compliant (6 of 6); WEEE-compliant

Vibration

IEC 68-2-36, IEC 68-2-6

Shock and drop

IEC 68-2-27, IEC 68-2-32


Ruckus ICX 7850 Ordering Information

 

Part Number

SWITCH BUNDLES

ICX7850-32Q-E2

Ruckus ICX 7850 with 32× 40/100GbE QSFP28 ports, 2 AC power supplies and 6 fans included, front to back airflow. Requires ICX7850-PREM-LIC to use advanced L3 features. Optical transceivers sold separately.

ICX7850-48F-E2

Ruckus ICX 7850 with 48x 1/10/25GbE SFP28 and 8x 40/100 QSFP28 ports, 2 AC power supplies and 5 fans included, front to back airflow.

Requires ICX7850-PREM-LIC to use advanced L3 features. Optical transceivers sold separately.

ICX7850-48FS-E2

Ruckus ICX 7850 with 48x 1/10GbE SFP+ and 8x 40/100 QSFP28 ports, 2 AC power supplies and 5 fans included, front to back airflow, MACsec.

Requires ICX7850-PREM-LIC to use advanced Layer 3 features and ICX-MACSEC-LIC to use MACsec. Optical transceivers sold separately.


Part Number

SWITCH BUNDLES WITH 3 YEARS REMOTE SUPPORT

ICX7850-48FS-E2-RMT3

Ruckus ICX 7850 with 48x 1/10GbE SFP+ and 8x 40/100 QSFP28 ports, 2 AC power supplies and 5 fans included, front to back airflow, MACsec. 3 years 24x7 remote support included. Requires ICX7850-PREM-LIC to use advanced L3 features and ICX-MACSEC- LIC to use MACsec. Optical transceivers sold separately.


Part Number

BARE SWITCHES

ICX7850-32Q

Ruckus ICX 7850 with 32× 40/100GbE QSFP28 ports, power supplies and fans sold separately (up to 2 power supplies and 6 fans per switch). Requires ICX7850-PREM-LIC to use advanced Layer 3 features. Optical transceivers sold separately.

ICX7850-48F

Ruckus ICX 7850 with 48x 1/10/25GbE SFP28 and 8x 40/100 QSFP28 ports, power supplies and fans sold separately (up to 2 power supplies and 5 fans per switch). Requires ICX7850-PREM-LIC to use advanced L3 features. Optical transceivers sold separately

ICX7850-48FS

Ruckus ICX 7850 with 48x 1/10GbE SFP+ and 8x 40/100 QSFP28 ports, power supplies and fans sold separately (up to 2 power supplies and 5 fans per switch), MACsec. Requires ICX7850-PREM-LIC to use advanced Layer 3 features and ICX-MACSEC-LIC to use MACsec. Optical transceivers sold separately


Part Number

POWER SUPPLIES AND FANS

RPS19-E

650W AC power supply, front to back airflow, for the Ruckus ICX 7850 (up to 2 per switch)

RPS19-I

650W AC power supply, back to front airflow, for the Ruckus ICX 7850 (up to 2 per switch)

RPS19DC-E

650W DC power supply, front to back airflow, for the Ruckus ICX 7850 (up to 2 per switch)ICX 7850 650W AC PSU, exhaust airflow, front to back airflow

RPS19DC-I

650W DC power supply, back to front airflow, for the Ruckus ICX 7850 (up to 2 per switch)ICX 7850 650W AC PSU, intake airflow, back to front airflow

ICX-FAN12-E

Fan assembly, front to back airflow, for the Ruckus ICX 7850 (up to 5 or 6 per switch depending on switch model)ICX 7850 exhaust airflow fan, front to back airflow

ICX-FAN12-I

Fan assembly, back to front airflow, for the Ruckus ICX 7850 (up to 5 or 6 per switch depending on switch model)ICX 7850 intake airflow fan, back to front airflow


Part Number

FEATURE LICENSE AND ACCESSORIES

ICX7850-PREM-LIC

ICX 7850 advanced L3 License adds support for OSPF, BGP VRRP, PIM, PBR, VRF

ICX-MACSEC-LIC

ICX MACsec license adds support for 128/256 bit MACsec encryption to ICX 7850

首页
产品
新闻
联系